liamw
01-13-2009, 01:30 PM
I received the G1 vinyl skin I ordered from iStyles just over a week ago and have now taken some photos to let you guys see what it looks like installed. Interestingly the two skins I ordered from iStyles are actually Decal Girl products packaged in an iStyles case.
The vinyl skins come in three pieces, one for the back, one to cover the buttoned area under the screen and a surround for the screen. The skins are printed on a cast vinyl produced by 3M, apparently this is a superior type of vinyl which is thinner and longer lasting, the skin should last 7-9 years according to the packaging.
It is coated after the printing process to protect the image, this also gives it a high gloss finish. The adhesive backing features a hexagonal pattern which means that any bubbles are easy to remove. Trapped air will follow these hexagonal channels as you push the skin down, working their way to the edge making the skin simple to apply.
The adhesive doesn't leave any kind of residue and it is really easy to peel the skins off and re-apply if you get it wrong. I have had this skin on for over a week now and it does exactly what I wanted, gives my phone a bit of extra protection without adding much bulk.
You can feel the edges of the stickers but only just, according to the blurb the finished sticker is 6-7 mil thick which is about 0.1778 millimeters. I haven't had any problem with the edges of the skin coming unstuck yet.
You also get a code to download a background which matches the skin, this is nice but I like to change my wallpapers fairly frequently.
Note: the 2nd and 3rd photos were taken with a rather shallow depth of field which i appreciate may not be the best for getting a close up look at a product like this when viewed full size (click on the photo).
http://farm4.static.flickr.com/3318/3194825682_aaed2a6514.jpg?v=0 (http://www.flickr.com/photos/friedgold/3194825682/sizes/o/)
The vinyl skins come in three pieces, one for the back, one to cover the buttoned area under the screen and a surround for the screen. The skins are printed on a cast vinyl produced by 3M, apparently this is a superior type of vinyl which is thinner and longer lasting, the skin should last 7-9 years according to the packaging.
It is coated after the printing process to protect the image, this also gives it a high gloss finish. The adhesive backing features a hexagonal pattern which means that any bubbles are easy to remove. Trapped air will follow these hexagonal channels as you push the skin down, working their way to the edge making the skin simple to apply.
The adhesive doesn't leave any kind of residue and it is really easy to peel the skins off and re-apply if you get it wrong. I have had this skin on for over a week now and it does exactly what I wanted, gives my phone a bit of extra protection without adding much bulk.
You can feel the edges of the stickers but only just, according to the blurb the finished sticker is 6-7 mil thick which is about 0.1778 millimeters. I haven't had any problem with the edges of the skin coming unstuck yet.
You also get a code to download a background which matches the skin, this is nice but I like to change my wallpapers fairly frequently.
Note: the 2nd and 3rd photos were taken with a rather shallow depth of field which i appreciate may not be the best for getting a close up look at a product like this when viewed full size (click on the photo).
http://farm4.static.flickr.com/3318/3194825682_aaed2a6514.jpg?v=0 (http://www.flickr.com/photos/friedgold/3194825682/sizes/o/)