Boot Screen Flasher 3000 by dom2684 & Octoberriot

[dom2684]

THis is a very simple batch file to assist you in flashing a boot screen
it still uses the same files as before its just put together in one section for ease of use as you can see

thanks to xMemphisx for supplying the required files for this to work


http://i28.tinypic.com/n35545.png

1.Extract BSF3000 and open the BSF300 Folder

2. Run CreateG1Splash.exe and choose your boot image (320 x 480 PNG for best results)

3. run the bootflash.bat and follow the on screen steps

* Reboot into fastboot

* IF you're on the older spl then u have 2 screens to flash so you're gonna follow step 3 and 4. and reboot

*If you're on the newest spl the you're just going to flash 1 screen by following step 2 and reboot

4. VIOLA!!! u have a new bootscreen with no copying and pasting



***special spl is haykuros spl***

BSF3000.zip (http://www.mediafire.com/download.php?nimf0zmnkdn)

[rwbarnes67]

Sounds and looks good!

I'll try it this evening after work!!!

[constellanation]

is the create g1splash the program that resizes your image and puts it into the correct format?

[draxter]

Will this work on a HTC Magic (32A) running cyanogen 3.6.8?

[constellanation]

i would think yes, but i imagine you have to have fastboot set up... atleast you did back in the day, when i flashed mine...

[crazythunder]

i still use the createg1splash.exe and then enter this command fastboot flash splash1 mysplash.rgb565.
anyone running this script find it easier?

[dom2684]

i still use the createg1splash.exe and then enter this command fastboot flash splash1 mysplash.rgb565.
anyone running this script find it easier?

it essentially does the same but without you doing any of the work


is the create g1splash the program that re sizes your image and puts it into the correct format?
no it just converts an image to the needed file to flash


Will this work on a HTC Magic (32A) running cyanogen 3.6.8?
it was made for the g1 i don't know if its the same process for a magic

[Iceberg]

I should look around more first but how does this work, ADB? Flash it on recovery? Something simple lol

[dom2684]

I should look around more first but how does this work, ADB? Flash it on recovery? Something simple lol
it flashes in fastboot

theyre the same commands u would normally use just all in one place for ease of use

[Iceberg]

it flashes in fastboot

theyre the same commands u would normally use just all in one place for ease of use

Maybe this is a dumb question I'm just not recognizing, but what is fastboot? Its like right on the tip of m tongue but I'm really dumb struct right now.

[dom2684]

Maybe this is a dumb question I'm just not recognizing, but what is fastboot? Its like right on the tip of m tongue but I'm really dumb struct right now.
its the sceeen when u turnon the phone wile holding the camera

(skating androids)

[Iceberg]

its the sceeen when u turnon the phone wile holding the camera

(skating androids)

I always referred to that as bootloader....

[dom2684]

I always referred to that as bootloader....
potatoe tomatoe lol

[Iceberg]

potatoe tomatoe lol

Haha potato! tomato!
Alright as long as my Android slang isn't off lol. I'll check this out I've been wanting to change my bootscreen easily since the 1.5 sdk.

[dom2684]

Haha potato! tomato!
Alright as long as my Android slang isn't off lol. I'll check this out I've been wanting to change my bootscreen easily since the 1.5 sdk.
as the post says if ur on the older spls the u flash 2 screens if ur on haykuros spl thenu only flash 1 screen

haykuro spl = special spl

[Iceberg]

as the post says if ur on the older spls the u flash 2 screens if ur on haykuros spl thenu only flash 1 screen

haykuro spl = special spl

Alright cool, I'm going to look into it now and I'm just on the regular spl with Cyans exp builds so its all good.